Construction of pipelines outfalls with polyethylene (PE)

Sewage Water The treated wastewater is normally leads to the discharge area of the receiving environment at a certain depth and distance from the coast. An output of deep water provide excellent dilution of wastewater. The depth will vary output in a range of 10-60 m, depending on the self-purification capacity of the receiving environment. […]

Environmental Product Declarations (EPDs)

A scientific study shows that the environmental footprint of plastic pipes is of medium equivalent to a third of the alternative materials A new study, the prestigious independent Institute for Technological Research of Flanders (VITO), funded by the European plastic pipes industry is conclusive in its results: the plastic pipes are more sustainable than alternative […]

How an outfall works?

Treatment system that uses the purification capacity of the sea: Waste of human origin have come to the seas for thousands of years, where there has been the assimilation of this organic load through the purification capacity of the ocean. In the past, when we lived in settlements with small populations could live in balance […]

Debugging System for Outfall (SIDES).

A purification system for outfall – SIDES (term used by ELINSUBCA) is an intelligent solution for the treatment of both industrial wastewater and domestic, which uses the purifying capacity of the ocean to degrade the organic load contained in municipal effluents, in balance with the marine ecosystem. Its operation can be explained by separating it […]

Sewer pipes Polyolefin have a lifespan of 100 years

Systems polyolefin sewer pipes have a life expectancy of at least 100 years. This is the conclusion of a recent two-year project commissioned by TEPPFA (Trade association Representing manufacturers and national associations of plastic pipe systems in Europe) and independently analyzed by Professor Heinz Dragaun of the School of Higher Education (TGM) in Vienna . […]

HDPE Water Submarines Intake

What are they used for: Systems water intake built in high density polyethylene ((HDPE acronym in English) are intended for the abstraction of water from a natural source such as:. Seas, lakes or rivers These systems are used for supplying water for various purposes such as providing drinking water or process water, for desalination of […]

HDPE outfalls

What are they for: Outfalls have been used with excellent results in different parts of the world for handling wastewater from cities and towns coastal, by which is put into use the natural ability of the ocean to clean up the pollution load of municipal effluents. This system provides debugging great advantages in handling the […]

Aqueducts Submarines in HDPE

How we benefit: Aqueducts submarines are used to transport drinking water or raw water through seas, rivers or lakes, in order to serve populations that are isolated by these aquatic environments. Several submarines aqueducts are currently installed in different parts of the world, carrying water to islands from the mainland, crossing gulfs and passing rivers […]

Underwater HDPE pipes in Seawater inlet

System design Comunicantes vessels. ELINSUBCA recently completed the construction of the intake system and underwater discharge pipe seawater with high density polyethylene (HDPE) for Thermal Power Plant Juan Bautista Arismendi (PJBA) in the town of El Guamache in Edo. Nueva Esparta. This plant is intended to reach a final installed capacity of approximately 750 MW, […]

Outfall – Optimal in Wastewater Treatment.

The best alternative for the treatment of wastewater in coastal villages. Outfalls with large dilution capacity combined with removal treatment solids (primary treatment) are the most efficient, reliable and economical to manage domestic wastewater in nearby sea populations alternative over any secondary treatment is conducted in treatment plants. Henry J. Salas, adviser Control of Water […]